If the issue persists , continue with the next solution. The Power light is on and the Print Cartridge light blinks. Remove the stack of paper from the tray. Carefully remove any jammed paper or bits of torn paper from the rollers inside the duplexer. Open the top cover.
|Date Added:||3 April 2016|
|File Size:||56.12 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Click File552 then click Print. Press the Power button to turn the product on. See your browser’s documentation for specific instructions. Solution Follow these steps in the order presented to resolve the issue. Carefully remove any jammed paper and bits of torn paper from the rollers inside the product. Never remove paper from the front if you can pull it from the back of the product or from the paper tray first. Slide the cartridge at a slight upward angle into the empty slot, and then gently push it forward until it snaps into place.
If the reskjet page does not printcontinue with the next solution. Open the top cover. The Power light desknet the Resume light are on In this error condition, the desket light pattern displays on the product control panel:.
Purchase replacement cartridges and other supplies from the HP Store or local retailers. The rear access door is unlocked or open, or the duplexer is not securely attached. How to print a self-test report Make sure that plain white paper is loaded in the input tray. Clean the rollers through the duplexer Follow these steps to remove the duplexer and then clean the paper rollers in the rear of the product.
This feature helps to avoid wasting ink and paper if the paper is not what you expected. Slide the paper length guide inward.
HP Deskjet 5552 Ink Cartridges
Insert a new cartridge Follow these steps to insert a new cartridge. How does HP install software and gather data?
Even small pieces of paper can cause paper feed issues. Reinsert the cartridge Hold the cartridge so that the nozzles face down and the contacts face toward the carriage. Follow these steps to perform a reset. Clean the paper rollers through the rear access door Follow these steps to remove the rear access door and then clean the paper rollers in the rear of the product. The product might go through a warm-up period which might last up to two minutes.
Reconnect the USB cable, and then try to print again. desojet
Remove and reattach the two-sided printing accessory duplexer Remove the duplexer. Remove the cartridges Press the Power button to turn on the product.
Blinking Lights on the HP Deskjet and Printers | HP® Customer Support
If the issue persistscontinue with the next solution. Carefully remove any jammed paper or bits of torn paper from the rollers inside the duplexer. Turn the printer off and on again Press the Power button to turn off the product. Do not use paper that has previously been printed on.
The self-test report prints.
Clean the paper rollers Follow these steps to clear the paper feed rollers inside the product. The Power light, the Resume light, and the Print Cartridge light blink In this error condition, the following light pattern displays on the product control panel:. If this roller is not clean, more paper feed issues are likely to occur. Europe, Middle East, Africa. If these steps resolved the issueand the test page printsthere is no need to continue troubleshooting.
Wait until the carriage stops moving desmjet is silent before proceeding.